General Instructions - MACAP P100 Serie Manual De Instrucciones

1

GENERAL INSTRUCTIONS

1-1 Before starting up the appliance, carefully read the following instructions.
1-2 The machine is designed for professionals and must be used only by
skilled personnel.
1-3 Keep the appliance well clear of water jets, damp areas and heat sources.
1-4 NEVER UNDER ANY CIRCUMSTANCES PLACE YOUR HANDS IN THE
BLENDER CUP WHEN IT IS FITTED ON THE APPLIANCE BODY.
1-5 NEVER FIT THE BLENDER CUP BASE ON THE APPLIANCE BODY.
1-6 Never use ice cubes or frozen fruit. (excluding the PA10 range)
1-7 Always consult a qualified electrician for repairs and maintenance.
2 DESCRIPTION OF APPLIANCE (Fig. 1)
A) Inspection plug
B) Cover
C) Containers: Plastic (P100 range)
D) Container gasket
E) Knife support
F) Container base
G) Machine body
H) Switch (fig. 4)
I) Mixer support (fig. 3)
3 INSTALLATION
3-1 Installation must be carried out in strict compliance with the provisions of
law currently in force in the country of use, with particular reference to said
country's accident and fire-prevention requirements and electricity
authority regulations.
3-2 Before connecting the appliance to the mains supply, make sure that the volt-
age indicated on the data plate is commensurate with that of the mains supply.
3-3 Carefully clean all the components (see point 5).
3-4 Make sure the switch is set to "0".
3-5 Insert the plug in the power inlet.
3-6 Tampering with the appliance or failure to comply with the relative connec-
tion requirements causes undue danger and consequently renders the
manufacturer's guarantee null and void.
4 OPERATION
4-1 Insert the cup with cover into the machine body (filled to a maximum of 2/3 capac-
ity), aligning the magnetic support with the rod (Fig. 2), and put the switch in posi-
tion "1" or "2" (P105 position "1"). For the mixer with continuos variable speeds
(P100V - P102V - P103V - PA10V), turn on the machine by rotating the switch
clockwise and increasing the speed gradually to the required setting.
4-2 In the electric mixer from the PA10 range, before activating the switch or the
speed regulator, press the round button several times for one or two seconds.
ENGLISH
Stainless steel (ranges P102 - P103 - P105 - PA10)
3