System Diagram - FONESTAR FO-22M44 Manual De Instrucciones

EN

SYSTEM DIAGRAM

MATRIX REMOTE CONTROL VIA RS-232
To configure the equipment using the RS-232 port, connect the cable as follows:
Use a suitable program for communication via RS-232 protocol
and perform the following configuration:
- Select the COM port used on your PC for this communication
- Baud rate: 9600
- Data bit: 8
- Parity bit: none
- Stop bit: 1
COMMAND
/*Type;
/%Lock
/%Unlock;
/^Version;
Undo.
PWON.
STANDBY.
%9961.
%9962.
%0911.
/%S/BAUD:[x].
SetSystemReboot.
Description
Report system model.
Lock front panel buttons.
Unlock front panel buttons.
Matrix model
Cancel the current operation and return to
previous switching status.
Power on the system.
Turn the system to standby mode.
Report the system locking status.
Report the system power status.
Reset to factory default.
Set the RS232 baud rate. The baud rate can
be showed when power on the unit. [x]=1~7.
[x]=1: 115200, [x]=2: 57600, [x]=3: 38400,
[x]=4: 19200, [x]=5: 9600, [x]=6: 4800,
[x]=7: 2400
System reboot.
Command Example and Response
FO-22M44
System Locked!
System UnLock!
V1.0.0
Undo Ok!
PWON
STANDBY
System UnLock!
System Locked!
PWON
Factory Default
/%S/BAUD:5.
SetSystemReboot.
- 4 -