Important Health Information And Safety Precautions; Electrical Safety - SCHOK FLIP SC3218T Manual Del Usuario

Important health information and safety precautions

When using this product, the safety precautions below must be taken to avoid possible legal
liabilities and damages. Retain and follow all product safety and operating instructions. Observe
all warnings in the operating instructions on the product. To reduce the risk of bodily injury,
electric shock, fire and damage to the equipment, observe the following precautions.

Electrical safety

This product is intended for use when supplied with power from the designated battery or
power supply unit. Other usage may be dangerous and will invalidate any approval given to
this product.
Safety precautions for proper grounding installation
Connecting to improperly grounded equipment can result in an electric shock to your device.
This product is equipped with a USB Cable for connecting with desktop or notebook computer.
Be sure your computer is properly grounded (earthed) before connecting this product to the
computer. The power supply cord of a desktop or notebook computer has an equipment
grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet
which is properly installed and grounded in accordance with all local codes and ordinances.
Safety precautions for power supply unit
1. Use the correct external power source . This product should be operated only from the
type of power source indicated on the electrical ratings label. If you are not sure of the
type of power source required, consult your authorized service provider or local power
company. For a product that operates from battery power or other sources, refer to the
operating instructions that are included with the product. This product should be
operated only with the following designated power supply unit(s). Travel charge: Input:
100-240V, 50/60Hz, 0.2A Output: 5V, 1000mA
2. Handle battery packs carefully. This product contains a Lithium-ion polymer or Lithium-
ion battery. There is a risk of fire and burns if the battery pack is handled improperly. Do
not attempt to open or service the battery pack. Do not disassemble, crush, puncture,
short external contacts or circuits, dispose of in fire or water, or expose a battery pack
to temperatures higher than 140°F (60°C).
Danger of explosion if battery is incorrectly replaced. To reduce risk of fire or burns,
do not disassemble, crush, puncture, short external contacts, expose to temperature
above 140°F (60°C), or dispose of in fire or water. Replace only with specified SB2000
battery. Recycle or dispose used batteries according to the local regulations or reference
guide supplied with your product.
102