Jumper JPD-ES200 Manual De Instrucciones página 8

Operating instructions:
1. Long press on "start" button for 2s for booting;
2. Short press on "site " button to select the treatment sites (shoulders, hands,
joints, abdomen, waist, leg);
3. Short press on "mode"button to select treatment modes (massage, acupuncture,
tapping, scraping and cupping);
4. Long press on "time" button for 2s to set the treatment time;
Short press on "▲" button of A or B channel to increase the treatment time;
long press for 2s to rapidly increase treatment time;maximum treatment time is
90min;
Short press " ▼" button of A or B channel to reduce the treatment time; long
press for 2s to quickly reduce the treatment time. The minimum treatment time
is 5min;
Short press on "Start" or "time" button to exit the setting and save the current
settings;
5. Short press on " ▲"button of A or B channel to adjust the intensity and start
running the A channel.
Note: The increment or decrement unit is 1 energy value, the minimum is 0,
*
and the maximum is 60.
Note: Short press on "start" button for pause of intensity output and then
*
Short press on "start" button for continue running;
6. When the running time is displayed as 0, the device will automatically stop