Gastrodomus WINE280DX Manual Del Usuario página 16

3. Temperature display: displays the set temperature. Each time the appliance is switched
off, the temperature will be shown in Celsius.
Display of set temperature value: Press button
shown on the display is the temperature value, next to which a LED indicator flashes. The temperature
display will end automatically after approx. 5 seconds.
Modification of the desired temperature value: Press button
button to lower the temperature to the desired value. The temperature display will end automatically
after approx. 5 seconds.
Fig.5 Double Temperature Zone settings
2. Indicator light
1. Light button
converter
1. Light switch: press until "LED1" appears on the screen, press twice to turn on the lower
floor light ("LED2"). Press and hold to turn off the lights.
2. Indicator light: indicates when the appliance is in use.
Temperature setting:
Upper zone: Press and hold the button
the or buttons or
Lower zone: Press and hold the button
temperature using the up and down buttons
seconds.
6. TROUBLESHOOTING
If you have trouble starting up the device or using it, please refer to the sections in this booklet that explain
how to proceed. This will help you to ensure that the equipment starts up and is operated correctly. If
problems persist, please read the following instructions
3. Upper temperature display
for a few seconds and set the desired temperature using
Then press the button
for a few seconds to display and set the desired
or to set the temperature. The temperature
or
4. Lower temperature display 5. ON/OFF
6. Upper temperature setting 7. Lower temperature setting 8. Temperature
again for at least 5 seconds.
o . Then press the button
carefully.
to set the temperature . Press the
again for at least 5