Start up and Use
1. Before use:
Plug the appliance to the 220-240V outlet.
After starting it up, place one hand on the air intake system and make sure it is cool enough to place
the products inside.
2. Digital Thermostat
This small intelligent digital thermostat is suitable for a 1 hp compressor. Main functions:
Temperature Display/Manual Temperature Setting, Automatic Defrosting/Illumination
Control/Storage of entered Values/Self-Testing/Parameter Locking
Control Panel operation
Setting the temperature
Press the "set" button to display the set temperature.
Press the
or
button to change and store the displayed value.
Press the "set" button to exit the setting and display the temperature of the refrigerated cell.
If the button is not pressed again within 10 seconds, the temperature of the refrigerated cell will be
displayed.
Illumination: Press the
button to switch on; Press again to switch it off.
Manual defrost start/stop: Press the
button and hold for 6 seconds to defrost or stop defrosting.
Refrigeration LED: During refrigeration, the LED is on; When the temperature of the refrigerated cell is
constant, the LED is off; With the "Delayed Start" mode on, the LED flashes.
Defrost LED: During defrosting, the LED is on; When defrosting is complete, the LED is off, During the
"Delayed defrost" mode on, the LED flashes.
Resetting the digital Thermostat
When the display shows "Disorder" press the
button for 2 seconds until the alarm rings, then quickly
press the
button for 6 seconds until the alarm rings again. The display will flash for 3 seconds and the
factory settings will be restored.
3. Warnings
Do not keep the door open for a long time and reduce the frequency of opening to ensure a constant,
cool temperature inside the appliance.
Never block the air intake and outlet system. Air must circulate freely to ensure cooling capacity.
Do not place too much food or beverages inside the appliance to avoid reducing the cooling capacity.
19