Kicker CX.4 Serie Manual Del Propietário página 2

Authorized KICKER Dealer:
Purchase Date:
Serial Number:
PERFORMANCE
Model:
RMS Power
@ 14.4V, 4 stereo,  1% THD+N
@ 14.4V, 2 stereo,  1% THD+N
@ 14.4V, 4 bridged,  1% THD+N
Length | in. [mm]
Height | in. [mm]
Width | in. [mm]
Frequency Response ± 1dB
Signal-to-noise Ratio
Input Sensitivity
Electronic Crossover
Bass Boost
Pro Tip: To get the best performance from your new KICKER Amplifi er and extend the warranty by 1 year, use
genuine KICKER accessories and wiring.
INSTALLATION
Mounting: Choose a structurally sound location to mount your KICKER amplifi er. Make sure there are no items
behind the area where the screws will be driven. Choose a location that allows at least 4" (10cm) of open
ventilation for the amplifi er. If possible, mount the amplifi er in the climate-controlled passenger compartment. Drill
four holes using a 7/64" (3mm) bit and use the supplied #8 screws to mount the amplifi er.
The KICKER CX Amplifi ers are capable of space-saving vertical mounting. Use a 2.5mm hex key (Allen wrench)
to loosen the endpanel, remove the existing brackets, then insert and tighten the double-slotted brackets to the
amplifi er as illustrated on the next page.
2
2012 CX 4-Channel Amps Rev F.indd 2 2012 CX 4-Channel Amps Rev F.indd 2
CX.4-SERIES AMPLIFIERS
OWNER'S MANUAL
MODEL: CX300.4
CX300.4
40W x 4
75W x 4 150W x 2
12-7/16 [320]
2-3/8 [60]
7-3/16 [180]
10Hz–20KHz
>95dB, A-weighted, re: rated power
Low Level: 125mV–5V
High Level: 250mV–10V
Selectable: HI, LO or OFF; Variable 50–200Hz @ 12dB/Octave
Variable 0–12dB @ 40Hz
6/22/2012 2:45:32 PM 6/22/2012 2:45:32 PM