We recommend not using the dehumidifier in room temperatures lower than 5°C.
MEMORY FUNCTION: the dehumidifier starts up again after a power failure keeping last settings.
AUTOSTOP FUNCTION: if the humidity it's lower than 5% respect to the one set by the humidifier automatically it stop.
MAINTENANCE OF THE HUMIDIFIER'S EXTERIOR SURFACE
Warning
Always pull the dehumidifier's plug out of the power socket before cleaning it, to prevent electric
shock and malfunction.
Warning
Do not wet the appliance or immerse it in water, otherwise electric shocks may occur.
Use a damp and soft cloth to clean the exterior surface of the dehumidifier.
Do not use solvents, petrol, xylene, talcum powder or brushes to clean the unit: these may damage
the surface or colour of the casing.
CLEANING OF GRILLE AND EXTERIOR SURFACE
To clean the external surface, use a soft cloth. If it is particularly dirty, use a damp cloth, taking care to dry the surface.
To clean the air supply grille, use a vacuum cleaner or a soft brush.
We advise removing the tank once every few weeks to prevent mould and bacteria forming on it. Fill the tank with clean
water a small amount of detergent; swill the water around in it, then it out and rinse it thoroughly.
The function of the filter is to filter the dust or dirt present in the air. If the filter is blocked by dust, the electrical
consumption will be higher than normal.
Do not operate the dehumidifier without having positioned the filter, this could damage the appliance.
The filter should be checked and cleaned at least after 250 hours of operation, or more frequently if necessary.
Cleaning instructions:
Remove the filter by pressing simultaneously on "push" at the top left and right of the filter with 2 hands. Clean the filter
with water (the water temperature must not be higher than 45 °C) and let it dry naturally. Place the filter back in its
housing.
V 07/20
CLEANING AND MAINTENANCE
CLEANING THE WATER TANK
CLEANING THE AIR FILTER
27