Tabla de contenido
Idiomas disponibles
Idiomas disponibles
10. SPECIAL PLUMBING INSTRUCTIONS
.
10.1 Connect the control box to the quick re-
lease valve used on the load springs.See Fig. 5 for
details.
Contact Link for available integrated air control
options.
LOAD SPRING
REGULATOR
LOAD SPRINGS
AIR SUPPLY
EXHAUST PORT
LIFT AXLE
CONTROL VALVE
QUICK
EXHAUST
LIFT SPRINGS
11. FINAL ASSEMBLY AND INSPECTION CHECK-
LIST
Are both shipping straps and extra nuts re-
moved? (see Fig.6)
Are all fasteners installed and bolts tightened to
proper torque specifications? NOTE: All fasteners
torque specifications are given for dry fasteners
with no additional lubrication required.
Are all wheel lug nuts tightened to recommended
torque specifications?
Is air control installation complete and checked
for leaks and proper operation?
Has the suspension been raised and lowered,
and inspected for any interference between the
auxiliary suspension and any truck components?
Are brakes and slack adjusters properly set, and
the wheels free to rotate?
Are wheel hubs sufficiently filled with the manu-
FIG. 5
facturer's specified lubricant? (SAE 80W-90 Miner-
al based or SAE 75W-80 Synthetic Gear Lube)?
Is the TOE-IN set properly (1/8 +/- 1/16 meas-
ured at the tire centers)?
Verify the steering knuckles come into contact
with the stop bolts before the tires interfere with
any other truck components?
CAUTION: With the vehicle unloaded, the auxiliary
axle's ride springs must be limited to a maximum of
20 psi to avoid improper weight distribution or com-
ponent damage.
Refer to separate Owner's Manual for details re-
garding operation and maintenance.
SHIPPING
STRAP
NUT
FIG. 6
Tabla de contenido
