connected to the wall input terminal. Also, do not touch the power cord right after the connection.
5. USE
DISPOSAL OF WASTE ELECTRICAL AND ELECTRIC EQUIPEMENT
This device is designed for domestic indoor use and should not be used otherwise. Follow the safety instructions in the
manual Observe the safety rules when disposing of waste electrical and electronic equipment (WEEE).
6. CABLES - V WARNING : Cable and cord.
Place all cables and cords so that nobody (or pet) can be caught in the feet or shot by mistake by moving in the room.
Keep cables and cords out of reach of children and pets. Do not let children play with cables and cords. If you do not
plan to use this product for a long time, turn it off by disconnecting the power plug. During thunderstorms, we
recommend disconnecting the product so that it is not damaged by possible electrical or electromagnetic surges. For
this reason, the outlet should be easily accessible, so as to disconnect when needed. Unplug the device immediately if
you notice it exudes a burnt or smoke. Do not under any circumstances open the product yourself, you might receive
an electric shock. Do not touch the power plug with wet hands. Also, if the plug is wet or covered with dust, dry or
completely wipe the power cord. Excessive moisture can cause electric shock. Be sure to connect the power cable to a
grounded outlet. (Does not apply to devices that do not require grounding.) If it does not, you may be electrocuted or
injured. Attach the power cord. If the power cable is not attached properly, a fire may occur. Make sure the power
cord is not in contact with hot objects like a heater. Failure to do so may cause fire or electric shock. Do not place
heavy objects or the product itself, on the power cord. Do not plug too many devices on one wall strip. Do not insert a
conductor wire as a metal rod in one end of the power cable if the other end is connected to the wall input terminal.
Also, do not touch the power cord right after the connection.
INTRODUCTION
The Steelplay® Dual Charging Stand allows you to securely store and charge up two PS5
controllers simultaneously.
TM
CONTENT
1 charging stand, 1 USB cable, 1 manual sheet
HOW IT WORKS
Place the product on a flat surface close to all components and devices you wish to use. Set one or two PS5
TM
controllers on the charging stand, on the holders provided for this purpose, by connecting them in the USB-C
connectors. Connect the cable between the USB port (located on one side of the station) and the PS5
console or PC.
TM
The controller charging time is about 4 hours. An indicator light indicates that the charging stand is switched on
(blue). Then refer to the indicator lights (LEDs) on your PS5
controller to identify when the controller is charging and
TM
loaded.
USB-C connector
Indicator light
Indicator light
USB-C port
TERMS OF WARRANTY
Warranty period is 2 years from date of purchase with proof of purchase submitted. Operating instructions must be
followed. Specifically excludes any damages associated with leakage of batteries. Product must not have been
damaged as a result of de-facement, misuse, abuse, neglect, accident, destruction or alteration of the serial number,