Idiomas disponibles
Idiomas disponibles
English
If you have the TRÅDFRI gateway or
DIRIGERA hub
Go to App Store or Google Play and
download the IKEA Home smart app.
The app will take you through the
process of installing your product and
other devices.
How to steer your lighting
When the product is connected to the
mains, it is possible to turn it ON/OFF
with the main switch or the foot switch,
but if you want to dim or connect your
product to other IKEA Home smart
products, you need to buy a separate
steering device (e.g. a remote control).
The steering device needs to be paired
with your wireless product. If you have
more than one (1) wireless product,
you can pair each one with the steering
device so that the entire combination
can be turned ON/OFF or dimmed at the
same time.
Pairing a steering device
to your product
1. Connect at least one (1) product to the
mains before you begin the pairing.
Make sure that the mains power is
turned ON.
2. Locate the pairing symbol on the LED
driver. Hold the steering device close
to the pairing symbol (no more than 5
cm away).
3. Press and hold the pairing button
on the steering device for at least 10
seconds. A red LED light will shine
steadily on the steering device. The
product will begin to dim and flash
one time to indicate that it has being
paired to the steering device.
How to factory reset your driver
If the product does not respond or if
you want to un-pair the product from
a steering device, you might have to
perform a factory reset. The unit is
forced to factory reset by carefully
pushing and holding in the small button
(marked RESET) with a tip of pen on the
LED driver enclosure and applying slight
pressure.
IMPORTANT!
• The product is for indoor use only and
can be used in temperatures ranging
from 5 °C to 45 °C.
• Do not leave the product in direct
sunlight or near any heat source, as it
may overheat.
• The declared radio range between
the unit and the steering device is
measured in open air.
• Different building materials and
placement of the units can affect the
wireless connectivity range.
Care instructions
To clean the unit, wipe with a dry soft
cloth.
Never use abrasive cleaners or chemical
solvents as this can damage the
product.
PRODUCT SERVICING
Do not attempt to repair this product
yourself, as opening or removing covers
may expose you to dangerous voltage
points or other risks.
Save these instructions for
future use.
4
