Installing The Kickstand; Installing The Handlebars - JUPITERBIKE ATLAS Manual De Instrucciones

INSTALLING THE KICKSTAND

INSTALLING THE HANDLEBARS

Remove the 4 screws on the top
cover, then remove the cover.
6
1. Locate Kickstand, Kickstand
Bolts, Washers, & Hex Wrench.
2. Align the Kickstand behind
where it attaches on the left
side of the frame.
3. Screw in bolts with washers
using the included Park Tool.
Loosen screws 1, 2, and 3 and align
the handlebar step with the front
wheel, then re-tighted. To adjust the
angle, loosen screw 4, adjust it, then
re-tighten.
Attach the handlebars onto the
handlebar stem and tighten screws.