Tabla de contenido
Idiomas disponibles
Idiomas disponibles
- Programs:
The remote control comes with 4 fac-
tory-installed programs:
Program A: Monday, Tuesday, Wednesday, Thursday, Friday
Program B: Saturday
Program C: Sunday
Program D: Not assigned
These programs can be modified as
desired and then transmitted to the
appliance. They can be changed as
often as you want and sent to one,
several, or all appliances in your hea-
ting installation. To change the pro-
grams, proceed as follows:
Press the
button. The display shows
the flashing clock setting 00:00, pro-
gram A, the PROG icon and the flas-
hing mode, e. g
make the necessary changes and con-
firm by pressing
next transition now flashes; press
the
and
buttons to adjust the time
and then confirm with
Continue in the same way (time, mode,
time, mode etc.) until all 24 hours of
program A are programmed. Then do
the same for programs B, C and D,
assigning each program to selected
days of the week. Press
change the assigned days and then
press
to confirm day 1 (Monday) and
move to day 2; and so on to day 7,
following which programming is com-
plete.
. Press
or
. The time of the
.
and
- Transmission:
It may only be necessary to transmit
the time setting, or the time setting and
the program.
To transmit the time setting, point the
remote control at the receiver on the
appliance and press the
time digits change momentarily to indi-
cate that transmission was successful.
To transmit the time setting and the
program, first send the time as descri-
bed above; you then have 3 seconds to
press
indicates that the program has been
sent successfully.
- Locking and unlocking the
remote control.
To prevent accidental changes to the
appliance's settings, the remote control
can be locked and unlocked as requi-
red. To lock the remote control unit,
press
,
The
that the remote control is locked, and
disappears when unlocked.
- Battery replacement indicator.
When the batteries are nearing deple-
to
tion a bAt warning appears on the dis-
play. Replace the spent batteries with
1.5V long life alkaline batteries of type
LR03 or AAA.
To replace the batteries, remove the
battery compartment cover on the rear
of the remote control. Dispose of the
spent batteries at a battery recycling
point.
- Battery saving function
to
To reduce battery consumption, the
remote control enters "sleep" mode
and the LCD display switches off after
30 seconds of inactivity.
Press any button except
reactivate the remote control. The LCD
display lights up.
again. The flashing PROG
, and
in succession.
icon is displayed to indicate
button. The
and
to
Tabla de contenido
