Genius S20 Instrucciones De Uso página 23

3
1. Remove the water tank
2. Open the seal and fill the water tank
3
3. Fill the water tank with distilled water to prevent calcifying.
Application
ATTENTION!
Only use the device with a filled water tank.
Only use the device on suitable surfaces.
1. If necessary, unwind the power cable and insert the plug into a functional outlet.
2. The control light will blink red while the device heats up.
3. The device is ready for operation as soon as the control light is illuminated continuously in red (after approximately 30 seconds).
4. Press the ON/OFF switch to activate the steam function.
Press once – Outer LED lights up in blue – max. steam strength
Press twice – Middle LED lights up in blue – min. steam strength
Press three times – Only the red control light lights up – Device ready for operation
4
5. Place the cleaning base
movement while cleaning. Do not clean the same spot for a longer period of time.
Carpet glider:
1. In order to clean carpet, place the cleaning base
4
move the cleaning base
Use as hand-held device:
1. In order to use the steam cleaner as a hand-held device, remove the handle with bar
pulling the bar up.
2. Remove the cleaning base
3. Place the extension hose
4. Plug the accessories adapter incl. nozzle
5. The nozzle can be used separately and serves as an attachment for further accessories (fig. J).
Instruction manual
by pressing the unlocking mechanism on the main device
3
2/3 of the way (fig. E, F). Attach the water tank
on the floor and move it above the surface to be cleaned. The cleaning base
4
with the microfiber wiper
over the carpet.
4
by pressing the round button on the lower end of the main device.
13
on the lower end of the main device
7
on the front end of the hose and rotate this counter-clockwise until it locks in place (fig. I).
1
(fig. D).
3
again until it locks in place (fig. G).
5
in the carpet glider
2
, by pressing the unlocking button and
1
until it locks into place (fig. H).
GB
4
should remain in
6
. This makes it easier to
23