Troubleshooting; Security Advices - CASO DESIGN IceChef Pro Manual Del Usuario

17 Troubleshooting

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:

17.1 Security advices

ATTENTION
► Repairs of electrical appliances must be carried out by qualified personnel who are
trained by the manufacturer.
► Repairs performed by untrained persons may result in considerable hazards for the
user and damage the machine.
17.2 Troubleshooting
Problem
indicator
lights up.
indicator
lights up
Ice cubes stick
together.
Ice making cycle
is normal but no
ice formed.
► If above mentioned steps don't solve the problem, please contact your customer
service.
Possible cause
Lack of water.
Ice is full in basket.
The ice making cycle is too
long.
Water temperature in inner
tank is too low.
Room temperature or
water temperature in inner
tank is too high.
Not enough cooling agent
in the coolant reservoir or
a part of the electronics is
defect.
Please note
Solution
Stop the ice maker and press
"on/off"button again to restart the unit.
Remove ice from ice basket.
Stop the ice maker and start it again
when the ice blocks are melt.
Replace the water. Temperature of water
recommended at 8-32°C.
The room temperature should be 5-40°,
water temperature should be 8-32°C.
Contact your customer service.
39