Autoadapt Carolift 40 Instrucciones De Uso página 24

24
Carolift Wheelchair lifts
Troubleshooting
The hoist is not activeted when .....................
toggle switch is pressed.
The hoist is working unusually slow.. ...........
All manuals and user guides at all-guides.com
The lift belt has been jammed and caused the fuse to blow. Remove the motor and
rewind the lift belt evenly. Replace the fuse.
End position is reached. Activate in reversed direction.
The electricity plug is not connected (applies for installations via the compartment
socket). Plug the cable in the socket.
Vehicle battery is discharged. Charge the vehicle battery.
A short circuit has caused the fuse to blow. Contact the autorized workshop.
Vehicle battery is discharged. Charge the vehicle battery.
In case of an emergency: Try to start the motor and let the motor run while
unloading the wheelchair.