EHEIM LEDcontrol 4200120 Manual De Instrucciones página 29

English
7. Select a lighting mode. You will see a display featuring times and the
assigned brightness of the channels of your EHEIM powerLED+ light.
‧ The bar colour in the program does not correspond to the LED
colours! Observe the channel assignment of your EHEIM
powerLED+, see chapter 8. Channel assignment EHEIM
powerLED+ light, page 32.
‧ You will see additional processing options via a right-click or the
symbol bars.
Moving the lighting mode
Mark the desired mode and move it up or down the list by
clicking or
Deleting the lighting mode
Mark the desired mode, click on
Caution: The lighting mode will be permanently deleted from
your computer.
Clearing the lighting mode list
Right-click and select [Empty Mode List]. All lighting modes
will be removed from the list.
Viewing the lighting mode in a quick run-through
see chapter 7.7 Viewing the lighting mode in a quick run-
through, page 31.
Transferring the lighting mode to the controller
see chapter 7.8 Transferring the lighting mode to the con-
troller, page 31.
8. Click on in order to save your lighting project. Changes that are not
saved will be lost!
29
.
.