NOTE: Tighten the bolts in an X pattern to
05
Align the mounting holes on the Frog Mechanism with the threaded inserts on the bottom of the Seat
Base. Bolt through and secure with 4 x M8 Bolts and Washers.
NOTE: Place the Star Base upside down on a
flat surface before installation.
06
Install 5 x Castor Wheels in the Star Base. Push until the Castor Wheels lock in place.
PARTS:
avoid cross threading.
• • 1 x Frog Mechanism
• • 4 x M8 20mm Bolts and Washers
PARTS:
• • 1 x Star Base
• • 5 x Castor Wheels
8
07
Flip the Star Base and Wheels assembly to the upright position. Install the wider end of the Gas Strut
into the Star Base Assembly. Place the Gas Strut cover over the top of the Gas Strut.
08
Install the narrow end of the Gas Strut into the Frog Mechanism by pushing into the mounting hole.
Video Instruction: bit.ly/nlrbuild
PARTS:
• • 1 x Gas Strut Cover
• • 1 x Gas Strut
PARTS:
• • NIL
9
