Instructions - Heron Elite SCANIMATION Manual Del Usuario

INSTRUCTIONS

1.Plug in the included
adaptor into the socket
and to the DC jack
located at the back to the
Scanimation® lamp
2.The lamp has 2 modes
for the display. Mode 1
is having the display run
while the top lamp is
on. Mode 2 is having the
display stay still while the
top lamp is on. Press the
on/off button once while
the lamp is off to turn on
the lamp on and activate
Mode 1. Press the on/off
button the second time
turn on Mode 2. Press the
third time to turn the lamp
off.
3. Hold the on/off button
when the lamp is on
during any mode to adjust
brightness. Brightness
cycles continuously.
4.Please use with confidence, it is normal for
the motor to have sounds while running.
03