Control Panel - Argo POLIFEMO ZEUS Instrucciones De Uso

ON/OFF BUTTON
Press this button on the control panel to turn the appliance on or off.
After pressing the button, the unit will emit two beeps, and will go into stand-by mode; press the ON / OFF button again
and the unit will operate in Normal mode, in low ventilation for 3 seconds, then it will switch to medium ventilation speed:
this only when the unit is turned on for the first time. The corresponding LED will light up on the control panel.
On the other hand, when it is not the first use, by pressing this button the second time the unit will first operate at medium
ventilation speed, and then switch to the previously set ventilation speed before switching off.
In stand-by mode it is only possible to turn the appliance on or off, all other functions are not operational.
With the unit running, press the ON / OFF button to restore the stand-by mode.
SWING BUTTON
With the unit on, press this button to activate the left-right oscillation of the air delivery grille, the corresponding LED on
the control panel will turn on. To turn off the swing function, press this button again
SPEED BUTTON
With the unit on, press this button to select the desired fan speed in the following sequence: low -> medium -> high. The
corresponding LEDs will light up on the control panel as follows:
low fan speed
MODE BUTTON
When the unit is turned on it works in Normal mode.
Press this button to select the desired operating mode in the following sequence:
Normal -> Natural -> Sleep
- Normal Mode: the unit works according to a pre-defined program; the corresponding LED on the control panel
is It's possible to select the desired fan speed.
V 01/21

CONTROL PANEL

medium fan speed high fan speed
16