Operation - Phonic SAFARI 2000P Manual Del Usuario

Operation

Connect the speaker jack labeled "Powered Out" on the
Safari 2000 and Safari 3000 portable audio systems to the
"In / Thru" jack of the corresponding Safari P system. The
Safari 2000 has a ¼" TS output jack that can be connected
to the "In / Thru" jack on the Safari 2000P, while the Safari
3000 includes a professional Speakon connector that
connect to the same connector of the Safari 3000P.
Additional speakers can be chained to the setup using the
unused "In / Thru" jack. Both jacks on each model work
identically, therefore either can be used as an input or a
thru. Do not attempt to use two connectors as both inputs
or thrus as this could potentially harm the speaker. Be
sure to use the Phonic Safari speaker systems with their
corresponding expansion speakers only.
The Safari 3000P offers two sets of "In / Thru" connectors,
with both ¼" TS and Speakon connectors being available.
These connectors work in parallel so we advise that only
one connector from each set be used at any one time. Do
not attempt to use the ¼" TS input with the corresponding
Speakon connector simultaneously.
Retractable handle and wheels only found on Safari 3000P.
2 Safari 2000P / Safari 3000P