PACKING LIST
·
Brushcutter (basic unit)
·
Grass deflector (6)
·
Small plate for grass deflector assembly
·
Screw for grass deflector 4x
·
Guard cap (9)
·
Screw for guard cap 2x
·
Auxiliary handle (4)
·
Connecting screw (14) 1x
·
Upper support (15)
·
Lower support (16)
·
Blade (10)
·
Nut (22)
·
Outer cup (23)
·
Spacer (24)
·
Inner cup (25)
·
Spacer (28)
·
Shoulder harness
·
Allen wrench (13)
·
Positioning tool (21)
·
Transport guard
·
Operator manual
·
Carefully inspect the product and make sure that no damage has occurred during the transport.
·
Do not immediately dispose of the packaging material until you have carefully inspected and successfully used the product.
WARNING
If any of the parts are damaged or missing, wait until the parts have been replaced before using the device. Using this product with damaged or missing parts can lead to serious injuries.
WARNING
Do not try to modify this device or attach accessories that have not been recommended for this device. Any changes or incorrect use of this device can be very risky and lead to possible
serious physical injuries.
WARNING
In order to avoid injuries, always remove the battery from the device before fitting parts.
ATTACHING THE GRASS DEFLECTOR
See figure 1 and 2
WARNING
The blade (7) attached to the grass deflector (6) is sharp. Avoid contact with the blade. Contact can lead to serious injuries.
Never use the device with a defective or missing grass deflector.
·
Remove the battery.
·
Turn the brushcutter so that you can reach the trimmer head (8).
·
Remove the screws from the trimmer head with a Phillips screwdriver (not included).
·
Attach the grass deflector (6) to the trimmer head.
·
Align the screw holes on the grass deflector with the screw holes on the trimmer head.
·
Tighten the screws.
·
Place the guard cap (9) on the grass deflector.
·
Align the screw holes in the guard cap with the screw holes on the grass deflector.
·
Tighten the screws.
WARNING
Even if you know the device well, the highest caution must be taken when using it. Even a momentary lapse of attention can result in serious injuries.
WARNING
When using a power tool, always wear safety goggles with side protection. Failure to wear this equipment may lead to objects hitting you in the eyes, resulting in serious injuries.
33