Idiomas disponibles
Idiomas disponibles
AE-15SIP
SIP SPEAKER
1. CONNECTION
This speaker includes a 50 cm cable with two connectors, an RJ45 for ethernet and a 12Vdc / 2A
input for power supply. The power supply is not included with the speaker.
In case of installations with PoE, use the included PoE Splitter, connecting its input to the Ethernet
network and its outputs to the speaker connectors. In this case, note that a PoE+ Switch is required.
In case of outdoor installation, connections between of the speaker with the network and power
source/ PoE splitter has to be placed inside a box with required IP protection.
2. PRE SETTING INFORMATION
AE‐15SIP can be set from SipManager software or from the webserver. This manual refers to
webserver configuration only.
Webserver is shared among some equipment of the same series, so few menus are unused in this
device.
3. CONNECTING TO THE WEB INTERFACE
The unit's webserver can be accessed by inputting IP address in web browser address field.
The default IP address of the device is 192.168.1.101. The IP address of the computer must be in
the same IP segment to allow the connection.
Note: If the input IP address is found to be incorrect or unknown. You can use the software
SipManager to search, confirm or modify it if necessary.
AE-15SIP Version 1.0
Page 3 of 14
Capítulos
