Installing The Water Supply And Outlet - ComAp Q341001001 Manual Del Usuario

V.

INSTALLING THE WATER SUPPLY AND OUTLET

INSTALLING THE WATER SUPPLY AND OUTLET
IMPORTANT: Install the water softener on the cold water sys IMPORTANT: Install the water softener on the cold water system (5°C to 20°C).
IMPORTANT: Upstream of the water softener, install the following (in sequence): IMPORTANT: Upstream of the water softener, install the following (in sequence): IMPORTANT: Upstream of the water softener, install the following (in sequence):
An unsoftened cold water pipe to supply the kitchen tap (not supplied). An unsoftened cold water pipe to supply the kitchen tap (not supplied).
-
A shut-off valve (not supplied). off valve (not supplied).
-
- A standard isolator (not supplied). A standard isolator (not supplied).
A new filter with a rating of 20 to 80
-
in accordance with the manufacturer's instructions. in accordance with the manufacturer's instructions.
A bypass (recommended) (not supplied). A bypass (recommended) (not supplied).
-
Downstream of the water softener, install a shut-off valve (not supplied). Downstream of the water softener, install a shut
-
Install these recommended accessories using standard unions. nstall these recommended accessories using standard unions.
CONNECTING THE WATER SOFTENER HEAD: CONNECTING THE WATER SOFTENER HEAD:
- IMPORTANT: Take great care not to reverse the inlet and outlet on the water softener. An arrow, IMPORTANT: Take great care not to reverse the inlet and outlet on the water softener. An arrow, IMPORTANT: Take great care not to reverse the inlet and outlet on the water softener. An arrow,
indicating the water inlet, is marked on the case (on the right). indicating the water inlet, is marked on the case (on the right
OUTLET
Note: Unions should be selected as a function of the pipes used (diameter and material). The water Note: Unions should be selected as a function of the pipes used (diameter and material). The water Note: Unions should be selected as a function of the pipes used (diameter and material). The water
softener inlet and outlet diameters are 3/4" (20x27) male. softener inlet and outlet diameters are 3/4" (20x27) male.
It is recommended that the water softener be connected to your water system using hose It is recommended that the water softener be connected to
-
flexible unions (not supplied).
Prevent leaks around the threads by using a standard sealer compound of drinking water grade, or Prevent leaks around the threads by using a standard sealer compound of drinking water grade, or Prevent leaks around the threads by using a standard sealer compound of drinking water grade, or
-
seals may be used.
Screw the hoses onto the head and check that there are no leaks. Screw the hoses onto the head and check that there are no leaks.
-
h a rating of 20 to 80 µm (not supplied). Change the cartridge (not supplied) regularly,
INLET
µm (not supplied). Change the cartridge (not supplied) regularly,
23
tem (5°C to 20°C).
your water system using hose-type