Lionelo Haari Manual Del Usuario página 7

the outside and set the inclination angle. Make sure that the button on the
back of the seat is latched and the backrest is locked (Fig. 11-13).
7.
Insert the parent's handle into the corresponding place on the frame and
secure it with the red button (Fig. 15, 16). Put on the basket (fig. 14)
8.
Put the footrests on the right places on both sides of the fork (Fig. 17)
Handle height adjustment
Adjust the height of the parent's handle by pressing the clips on its parent frame
and moving the handle in the desired direction. A 3-step adjustment of 91 - 107
cm is possible.
Locking the rear wheels
Depress the brake feet on both wheels to lock the rear wheels. Move it down to
lock the wheel or up to unlock it. Both brakes work independently of each other.
How to lock pedals – free wheel function
The three-wheeled bike has a free wheel function. When using this function, the
child can pedal regardless of the speed of the bike.
To set this configuration, switch the lever on the side of the wheel. If you want
the movement of pedals to lead to movement of wheel, switch this lever again.
If your child uses a tricycle alone, make sure that the freewheel function is disabled.
How to disassemble the tricycle
To assemble the device:
1.
Unscrew the seat at the bottom of the frame and remove it with the base.
2.
Remove the screw that secures the handlebar to the frame. Disassemble
the steering wheel and slide off the front wheel.
3.
Unhook the headband using the button on the side.
4.
Disconnect both rear wheels (each has a silver lock button that must be
released first).
5.
Unlock the parent handle lock (red button at the bottom) and pull it out.
6.
Remove the footrest and cup holder.
For transport purposes, lower the tricycle steering wheel by pushing the red
button, then fold the seat backrest and secure it with the railing by closing it
above the backrest.
‑ 7 ‑ EN