TFA Dostmann 60.4523.01 Instrucciones De Uso página 12

TFA_No. 60.4523_Anleitung 23.02.2022
Radio controlled clock with outdoor temperature and indoor climate
• Once the DCF time reception is deactivated (OFF), the clock and date must be manually set.
• If the DCF reception is activated, the manually set time will be overwritten by the DCF time when the signal is received
successfully.
7. Display change
• Hold and press the ▲/SHIFT button, you can choose between the large-scale display of time or outdoor temperature in
normal mode.
8. Alarm time setting
• Press the ALARM button in normal mode to enter the alarm mode. AL and the last adjusted alarm time appear briefly on the
display.
• Press and hold the ALARM button for three seconds to enter the setting mode.
• The hour digits flash.
• Press the ▲/SHIFT or ▼/RCC button to adjust the hours.
• Confirm the setting with the ALARM button and set minutes in the same way.
• Press the ALARM button again to return to the current time.
• The alarm is activated and the alarm symbol appears on the display.
• To deactivate/activate the alarm, press the ▲/SHIFT button in alarm mode.
• The alarm symbol disappears/appears on the display.
• When the alarm is activated, the alarm starts to ring when the set alarm time is reached. The alarm symbol flashes.
• The alarm sound automatically turns off after 2 minutes if not stopped manually.
• Press any button (except SET) and the alarm will stop.
• Press the SET button to activate the snooze function.
• The alarm will be interrupted for about 5 minutes.
• The snooze symbol flashes.
• Press any button to stop the snooze function.
9. Installation
• When placed outdoors, choose a shady and dry place for the transmitter. Direct sunlight may trigger incorrect measure-
ment and continuous humidity damages the electronic components needlessly.
• Before the final installation, make sure that the measured values are transmitted from the transmitter at the desired instal-
lation site to the base station.
• Do not use the base station in the vicinity of radiators, other sources of heat or in direct sunlight.
• Make sure to avoid the vicinity of any source of interference such as computer screens, TV sets or solid metal objects.
Within solid walls, especially ones with metal parts, the transmission range (max. 100 m) can be reduced considerably.
22
17:15 Uhr Seite 12
Radio controlled clock with outdoor temperature and indoor climate
10. Battery replacement
• As soon as the corresponding battery symbol appears in the display, please change the batteries of the base station or
transmitter
• Please note: When the batteries are changed, the contact between the outdoor transmitter and the base station must be
restored – so always restart both devices or start a manual transmitter search.
11. Additional outdoor transmitters (optional)
• For having more than one transmitter, select different channels for each transmitter with the 1,2,3 switch. The new trans-
mitter will be received automatically by the base station.
• The outdoor values will be shown on the display of the base station. If you have installed more than one transmitter, press
the CHANNEL button to change between the outdoor transmitters (1-3).
• You can also choose an alternating channel display. Press the CHANNEL button. After the last registered channel, a circle
symbol will appear.
• To cancel an unused channel, hold the CHANNEL button for 3 seconds. "-:- -" appears on the display.
12. Troubleshooting
Problem Solution
➜ Ensure the batteries' polarities are correct
No indication on the
➜ Change the batteries
base station or the
outdoor transmitter
➜ Activate DCF reception in setting mode (ON)
No DCF reception
➜ Start the initialization manually
➜ Wait for an attempt reception during the night
➜ Choose another place for your device
➜ Set the clock manually
➜ No outdoor transmitter is installed
No reception
➜ Check the outdoor transmitter's batteries
of the outdoor transmitter
Display "- -, -" (only use batteries/rechargeable batteries with 1.5V voltage!)
➜ Start manual search for the outdoor transmitter
➜ Choose another place for the transmitter and/or the base station/reduce the distance
➜ Change the batteries
Incorrect display on the
➜ Base station: Use a pin to press the RESET button
base station or the
outdoor transmitter
If your device fails to work despite these measures, please contact the retailer where you purchased the product from for advice.
23