Sonic Alert SBR350SS-V3 Instrucciones De Funcionamiento

105.00mm
English
Sonic Boom Alarm Clock
with FM Radio & Bed Shaker
Model SBR350ss-V3
OPERATION INSTRUCTIONS
IMPORTANT- Please read these instructions carefully before use and retain for
future reference. See operating instructions on back.
Warning: To prevent fire or shock hazard do not expose this appliance to rain or
moisture. Before connecting to mains make sure that the requirements
specified on the apparatus corresponds to the available power supply
i.e. AC100V-240V (50Hz/60Hz)
INSTRUCTIONS
FM RADIO ALARM CLOCK WITH BED SHAKER
MODEL SBR350SS-V3
5 6 7 8 9 0 1
4
12 08
3
VIB/BUZZ
VIB
BUZZ
2
TIME
LOCK
ALARM
1
FM
CLOCK RADIO
VIBRATOR DC9V IN
1 3 15 1 4
Features shown on diagrams above:
1) Setting Switch 7) Minute Button
2) Alarm Option Switch 8) Snooze / Dimmer
3) Alarm Indicator Button
4) PM Indicator 9) Alarm Off Button
5) Sleep Button 10) Volume Control
6) Hour Button 11) Function Switch
Test Mode -
1) Slide the SETTING Switch (1) to TIME position, press the SNOOZE button (8)
for 3 seconds to enter the Test Mode. The display will show "7ES7" to indicate
it is in TEST Mode.
2) If within 1 minute no button is pressed, then it will exit the Test Mode and return
back to the Time Mode.
3) Press any button within 1 minute (except the Snooze buttons, which has no
effect), it will exit the Test Mode immediately.
4) While in Test Mode, sliding the Alarm Option Switch (2) will demonstrate the
different functions of the clock:
a) Alarm Option Switch at BUZZ, it will demonstrate the buzzer sound.
b) Alarm Option Switch at VIB, it will demonstrate the vibrator.
c) Alarm Option Switch at VIB & BUZZ, it will demonstrate the buzzer
sound & the vibrator.
5) After finish with the Test Mode, press any button (except the Snooze buttons,
which has no effect) it will exit the Test Mode immediately.
Setting the correct time -
1) Slide the Setting switch (1) to "TIME" position.
2) Depress Hour button (6) as necessary to advance the clock display until the
hour is correct. Depress Minute button (7) as necessary to advance the
clock display until the minute is correct.
3) Slide the Setting switch (1) to the position marked "LOCK" this will prevent
the clock time from being changed.
Setting the alarm time -
1) Slide the Setting switch (1) to ALARM position, the Alarm indicator (3) will
light up to indicate the alarm has been enabled.
2) Depress Hour button (6) as necessary to advance the clock display until the
hour is correct. Depress Minute button (7) as necessary to advance the
clock display until the minute is correct.
3) Slide the Setting switch (1) to the position marked "LOCK" this will prevent
the alarm time from being changed.
Selecting 12 or 24 hours format –
– the clock is set to 12 hour for UK, USA; and the clock is set to 24 hour for
Europe.
Slide the Setting switch (1) to LOCK position, press the Hour Button (6) for 6
seconds to enter the hour selection mode, the display shows "12 H" or "24 H".
A short press of the Hour Button (6) to toggle between 12 or 24 hours.
If no selection is made within 4 seconds, then the last displayed hour format will
be chosen and the display will return to the normal Time mode.
To Play Radio-
1) Slide the Function Switch (11) to "ON" position to turn on the radio.
2) Use rotary Volume wheel (10) and turn to desired listening level.
3) Tune radio station by turning the Tuning Dial (12) to desired radio frequency.
Radio Reception-
For best reception unwind wire Antenna cord (15) to its full length . Make
sure the radio isn't near any electrical appliances that may cause interference.
Sleep Timer Operation-
1) You may use the Sleep function (5) to have the radio on while you go to
sleep. It will automatically shut itself off after the specified time.
2) Make sure the Function Switch (11) is NOT set to "ON" otherwise sleep
function will not work and the radio will play continuously.
3) Press Sleep button (5) and radio will play for two hour. You can also set
sleep timer for other lengths of shut off time.
4) To set other length of sleep time, press the Sleep button (5) once to reduce
the sleep time by 10 minutes. This action can be repeated until the desired
sleep time is required.
MODEL:RHK182-V3(SBR350SS-V3) 093-HK182-047
.
BUZZ
AUTO 11
ON
OFF
12
Figure B
6 1
12) Tuning Dial
13) Vibrator Input
14) DC Power Input
15) FM Antenna
16) Backup Battery
Compartment
Updated Warranty wording
Enable the Alarm -
To enable the alarm function, slide the Function switch (11) to position
marked "BUZZ" OR "AUTO".
"BUZZ" – Wake to buzzer,
"AUTO" - Wake to radio
Alarm Option -
Once the alarm time is set, different alarm option can be selected.
Use the Alarm option switch (2) to select different alarm option:
a) set to VIB for bed shaker
b) BUZZ for sound
c) VIB/BUZZ for both.
Shutting Off Alarm-
Alarm can be shut off temporary for the day or permanently shut off.
1) When the alarm goes off, simply press the AL Off button (9) the alarm will
shut itself off for the day and come back on the next day at the same time
if alarm setting has not changed
2) To shut the alarm off permanently, slide Function switch (11) to OFF
position. The alarm will not come on until Function Switch (11) is set to
"AUTO" or "BUZZ" position again.
Adjusting The Alarm Duration Time –
The default alarm duration time setting is 30 minutes; you may adjust the alarm
duration between 1minute and 59 minutes as desired. To adjust the alarm
duration:
* Slide the SETTING Switch (1) to ALARM position,
button (8) for 6 seconds. The clock display will show the default alarm duration
as '30'. Release the AL set button.
* Press the MIN button (7) to adjust the alarm duration to the desired setting,
from 1 minute to 59 minutes.
* When the display is showing the desired alarm duration time, it will return to the
normal clock mode after 3 seconds. The new alarm duration time setting
becomes the new default and remains in the memory until you change it again.
Snooze Operation –
1. When the alarm is on, you may press the SNOOZE Button (8) to stop the
alarm temporarily. The alarm will shut off for 9 minutes or for the selected
predetermined time from 1-30 minutes, and then turn on again. The snooze
operation may be repeated indefinitely until the alarm is turned off.
Adjusting The Snooze Time –
The default snooze time setting is 9 minutes but you may adjust the
snooze time between 1 minute and 30 minutes as desired. To adjust the
snooze time:
* Slide the SETTING Switch (1) to LOCK position,
the SNOOZE Button (8) for 4 seconds. The clock display will show the
default snooze time '9'. Release the Snooze button.
* Press the Minute Button (7) to adjust the snooze time to the desired
setting, from 1 minute to 30 minutes.
* When the display is showing the desired snooze time, it will return to the
normal clock mode after 3 seconds. The new snooze time setting
becomes the new default and remains in the memory until you change it
again.
Dimmer Operation –
There is a 2-level brightness control for the LED display. Press the SNOOZE
button (8) once toggle between bright and dim.
*NOTE*: The dimmer function will not work, when the clock is in snooze mode.
Bed Shaker / Vibrator- Figure B
1) Attach the bed shaker jack to the back of clock at VIBRATOR input (13).
2) To turn on vibrator, slide Alarm Option switch (2) to VIB or VIB/BUZZ
position.
3) Place vibrator under mattress or pillow.
Volume-
To adjust the volume, rotate the Volume wheel (10) located on front top right
side.
DC9V Power Input -
Attach the DC power supply input to the back of clock at DC9V IN (14) next to
the VIBRATOR input(13), smaller input of the two. Important do not confuse
the DC input with vibrator input.
Battery Backup-
To use battery backup, you can install a 9-volt alkaline battery in the back
of the clock located under the Battery cover (16). Please note the LED
display will be off during power failure but the clock will still be running and
keeping proper time until the power comes back. Battery not included.
CAUTION:
TO REDUCE THE RISK
OF ELECTRICAL
SHOCK, DO NOT
REMOVE THE COVER
The Lightning flash with
arrowhead symbol, within an (OR BACK) FROM THE
equilateral triangle, is intended
PRODUCT. NO USER
to alert the user to the presence
SERVICEABLE PARTS
of uninsulated "dangerous
INSIDE. REFER
voltage" within the product's
SERVICING TO YOUR
enclosure that may be of sufficient
SONIC ALERT DEALER.
magnitude to constitute a risk
of electric shock to persons.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
SONIC ALERT'S 1 YEAR LIMITED WARRANTY
The Sonic Boom Alarm Clock is warranted against manufacturing defects in
materials and workmanship for one (1) year from the date of purchase.
Within this period Sonic Alert will repair or replace at our option without charge for
parts and labor. Simply contact our customer service department to obtain an RA
(return authorization) number and instructions on how to process your product
for return. Call 1-888-864-2446 or e-mail to [email protected]. You'll need a
copy of your receipt to process the return authorization.
Sonic Alert Warranty Center, 1081 West Innovation Dr., Kearney, MO 64060
This device complies with part 15 of the Federal Communications Commission
Rules. Operation is subject to the condition that this device does not cause
harmful interference.
Note: The manufacturer is not responsible for any radio or TV interference cause
by unauthorized modifications to this equipment. Such modification could void
the user's authority to operate the equipment.
GENERAL DATA
Power Consumption: Adaptor DC9V , 650 mA
Radio Frequency: FM: 88-108 MHz
UL listed transformer (Underwriters Laboratories)
Sonic Alert, Troy, MI 48083
www.SonicAlert.com 1-888-864-2446
Made in china
then press the SNOOZE
then Press and hold
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
.