Installation Instructions - Vasner Citara Serie Guía De Instalación Y Manual De Usuario

Front

Installation instructions

1. Remove the heater from its packaging and remove any packaging
materials from the heater and accessories.
If you have tested the heater function before installing it, allow
it to cool before installing it.
2. Next, carefully choose where the heater is to be installed.
It can be installed under the following circumstances:
a. On the wall using the wall/ceiling bracket
b. On the ceiling using the wall/ceiling bracket
The heater should not be positioned opposite outside windows,
as this would result in the majority of the thermal energy being lost.
Ensure there is a minimum distance of 50 cm to other objects and en-
sure that the radiation area is as free as possible to maximise the effect.
There must be a distance of at least 10 cm to the side of the heater, as
well as above and below it.
Removable wall bracket
Rotatable safety
mechanism
Back
GB
VASNER
Drill hole in each
corner
15