Care And Cleaning - Genius Fusion Smart Instrucciones De Uso

GB

7 Care and cleaning

CAUTION!
Risk of cutting injuries due to sharp blades!
Do not touch the blades with your hands. Always hold the inserts by the plastic.
ATTENTION!
Clean the product immediately after use to avoid the build-up of germs or mould.
Dismantle the product before cleaning.
„
Do not use sharp or abrasive cleaning agents or cleaning pads.
„
Allow all parts to dry thoroughly before putting them away.
„
We recommend hand-washing any parts that contain blades (e.g. blade inserts, slicers, grating inserts)
„
to preserve quality and sharpness over the long term.
Note: Some types of fruit and vegetables can stain the plastic parts (e.g. beets). Frequent cleaning of
the collecting container in a dishwasher can affect the material's transparency. This is normal and not
a cause for concern; it does not limit the functionality.
Cleaning the blade inserts
Cleaning the pin block
36
Instruction Manual
To remove the blade inserts, hold down the cutter base with one
hand. Lift the blade insert with the other hand and pull it out. Please
ensure that you do not touch the blades while doing so.
If food residue is caught between the blades, twist the blade insert
to face upwards with the blunt side and carefully remove the food
residue using a dishwashing brush.
Self-cleaning function: To clean the built-in pin block, press the 'Push'
button on the top of the cutter top. The built-in cleaning sieve is
automatically pushed downwards and removes even small pieces of
food residue from the pin block.
The lid should remain open during this process. If the self-cleaning
process is launched when the cutter top is closed, there must not be
any blade inserts in the frame.
Remove the detachable pin block from the cutter top. By lifting the
transparent cleaning sieve, even small pieces of food residue can be
removed from the pin block.