Replacing The Bulb - universalblue T 90 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

The filters can be cleaned by hand. Soak them for about 3 minutes
in water with a detergent that releases grease and then rub it gently
with a soft brush. Do not apply too much pressure, avoid damaging
it. (Allow it to dry naturally out of direct sunlight).If you wish, filters
can also be cleaned in the dishwasher if the water reach 60º as
maximum temperature.
The filters should be washed separately and should not be mixed
with crockery and other kitchen utensils.
To remove aluminum filters, please do it as below:
 Press the button allocated in the filter.
 Pull the filter back and down gently.
 Repeat the operation in reverse to install the filters again.

REPLACING THE BULB

The bulb must be replaced by the manufacturer, its
service agent or similarly qualified person.
Always switch off the electricity supply before carrying
out any operations on the appliance. When handling bulb,
make sure it is completely cool down before any direct contact to
hands.
32
Tabla de contenido
loading

Este manual también es adecuado para:

Ubca2000-20

Tabla de contenido