Device Elements - NSS Pacer 112 UE Manual De Instrucciones

Device elements

Illustration on Page 2
1 Brush cover
2 Brush
3 Brush head
4 Indicator bundle
5 Unlocking brush head
6 Upholstery nozzle
7 Crevice nozzle
8 Handle adjustment
9 Indicator lamp (red)
10 Pile height adjustment knob
11 Filter cover
12 Blower filter
13 Motor filter
14 Filter bag
15 Power switch
16 Suction pipe
17 Suction hose
18 Handle
Transport
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Storage
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.
Troubleshooting
Danger
First pull out the plug from the mains before
carrying out any tasks on the machine.
Motor does not run
No electrical voltage.
–
 Check cables, plugs, fuse, and socket.
Thermostat switched off the motor be-
–
cause of overheating
 Pull mains plug, replace blocked filters,
or remove blockage from the suction
hose.
The unit is operational again after it has
cooled down.
Rattling noise when switched off
Note
The brush is equipped with a slip clutch
–
that disengages when too large or
blocking objects are sucked in.
The clutch is re-engaged after the unit
–
is switched off. This produces a loud
rattling sound.
 Check the brush for obstructing objects
and remove them if necessary.
The noise can not be heard when the unit is
switched back on.
– 2
EN 17