Beper 40.972A Manual De Instrucciones página 10

Cordless hair clipper Use instructions
HOW TO CHARGE/RECHARGE BATTERY OF HAIR CLIPPER
The optimal temperature to charge the hair clipper is between 5°C and 35°C. Do not expose the hair
clipper to high temperatures for long periods.
Before charge, make sure the hair clipper is off, the switch on (2) must clearly show 0/Charge.
Insert the battery charger (12) directly into the hair clipper or into the base.
The battery start to charge and the charge indicator (3) lights.
During the first charge, let the hair clipper plugged for 10-14 hours consecutive. The next charge
will take 7/8 hours.
The hair clipper got a 45 minutes autonomy after complete charge.
For optimal duration, it is recommended to charge the battery when it is completely low.
INSTRUCTION FOR USE
NOTICE
For the first use of the cut clipper, you have to cut a little bit hair.
Before starting hair cut :
– Make sure the hair clipper is clean, without hair or dirt. If necessary distribute a drop of oil between
the blades of the hair clipper and check that it is running smoothly;
– Place a towel around the neck and shoulders of the person having the haircut;
– Seat the person so their head is approximately at your eye level. This allows ease of visibility while
cutting and a relaxed control of the unit;
– Before cutting always first comb the hair so it is tangle free and as it is naturally worn;
– Cut the hair in a relaxed and slow manner. Use short stroked only to work gradually over the entire
head ;
– Always take off a little hair at a time, you can always trim off additional hair later;
– As you work, comb the hair frequently back into the style to which you are cutting;
– When cutting with this hair clipper it is better to leave the hair dry, not wet.
USE
Put the switch (2) on CUT to cut hair; on THINNING for layered hair cut.
While making slip the adjustable head (6) on the hair clipper it is possible to regulate the cut length.
The adjustable head must be insterted on the hair clipper step by step : put the head on the top and
fix it by pressing down. Pull up to remove it.
Block the adjustable head (6) as desired by pressing the switch lock/unlock (5) on LOCK. To change
cut length, unlock the head (moving the switch on position UNLOCK) and choose the desired cut
length.
7 positions are available for various cut length :
1 (without adjustable head) – 6 – 8 – 10 – 12 – 14 – 17 mm.
Make slip the adjustable head (6) forward to obtain a longer cut, backwards for shortest cut. After
cutting, always switch off the hair clipper.
10