How To Assemble; Attach Handle - Eureka 96 Guia Del Propietario

8
All manuals and user guides at all-guides.com
ENGLISH

HOW TO ASSEMBLE

Assemble completely and charge batteries for 14-16 hours
before using.
CAUTION: Use only Eureka model UA100025b charger.
Have a screwdriver available for assembly (not included).
Attach Handle Grip
Step 1: Locate the 2-part bolt
Step 2: Align the handle grip and handle tube holes and secure

Attach Handle

Step 1: Use your thumb to pull back on the lock button
Step 2: Push handle
Step 3: Release lock button
Secure Wall Bracket on Wall
Have a 1/4 inch drill available for assembly (not included).
Cleaner hangs in bracket with the nozzle end down. Mount on a
wall in close proximity to an electrical outlet where there are not
dangerous objects hidden beneath the wall surface like electrical
wires, pipes, etc. Leave 14 inches above the floor for clearance.
Step 1: Hold bracket
Step 2: Use a 1/4 inch drill for drilling holes for the plastic
Step 3: Insert the anchors
Step 4: Tighten the screws
Step 5: Place cleaner, with the nozzle pointed down, on the
Step 6: Plug the charger
Note: This charger has been designed to use as either
(CONTINUED)
(Fig. 1)
H in the assembly package.
AA
with the 2-part bolt H . Tighten the bolt
AA
Note: The single hole in the handle tube faces
forward in relation to the handle grip.
(Fig. 2)
into top of cleaner.
G
AA
M and rotate handle
AA
it locks into place.
I against wall to mark location for
AA
screws. Make sure the wall bracket is positioned verti-
cally, with the charger socket at the bottom.
anchors N .
AA
N and drive the screws
AA
both holes.
O to secure the bracket
AA
wall bracket I .
AA
L
into an electrical outlet.
AA
a wall mounted charger or to sit on a counter or
shelf . To use on a counter or shelf, locate next
P
AA
to an electrical outlet. Take the battery
the cleaner and put in the counter bracket
4).
M .
AA
G until
AA
(Fig. 3)
O into
AA
I .
AA
out of
C
AA
I (Fig.
AA