After Each Use; Breastfeeding; Physiology Of Baby Breastfeeding - Kitett KOLOR PLAY Manual De Instrucciones

c. After each use
Illustration 4.c
1 - Unscrew the breast shield / handle unit from the bottle.
2
- Remove the taupe-coloured "Clean Valve". Use the bottle stand to avoid any risk of
upsetting the bottle.
3
- Place the cap firmly on the bottle. Please refer to the following section regarding the preser-
vation/de-freezing of breast milk. Breast milk can be kept in a refrigerator at 4°C for 48 hours.
4
- After use, rinse all parts in contact with milk in cold water. Then wash them in hot and soapy
water. Rinse and leave to dry in the open-air on a piece of paper towel.
d. Dismantling the breast pump
Illustration 4.d
1
- Disconnect the handle/body/membrane assembly of the breast shield by twisting slightly on
the side
2
-Twist the handle upwards to release it from the body of the breast pump.
3
- Remove the membrane and its base. Carefully remove the stem from the base, making sure
you do not damage the membrane orifice.
4
- Dismantle the two parts comprising the valve: the transparent valve and taupe-coloured
positioning ring.

Breastfeeding

Physiology of baby breastfeeding

KOLOR PLAY® breast pump provides mothers with the natural sensations of
breastfeeding by recreating the way in which babies feed.
It reproduces the 2 physiological phases of breastfeeding:
- The stimulation phase to generate milk let-down (short, rapid movements),
- The expression phase to collect milk (longer, less frequent movements).
GB
17