Axxess TYTO-01 Instrucciones De Instalación página 5

Online-store car audio and autogoods Winauto
Installing the TYTO-01
1. With all the connections completed, plug the 10-pin and 12-pin harnesses into the
TYTO-01.
2. Plug the 20-pin Toyota harness into the vehicle side harness.
3. Plug the aftermarket harness into the aftermarket radio.
4. Cycle the key by turning the ignition on, then back off, then on again to test the radio.
Testing the TYTO-01
1. With the ignition on turn the radio on to verify the radio works.
2. Listen to the music at a moderate level; if the music is too low or too distorted see the
Audio Level Control section.
All manuals and user guides at all-guides.com
TYTO-01
4