Getting Started - Divarte TT200-BT Manual De Instrucciones

1. Protective cover
2. Visits of the Adapter 45
3. USB / SD port control
4. Tone arm control
5. Automatic shutdown mode
6. Selecting the playback speed
7. Volume and power button
8. Headphone output 3.5mm jack
9. Cell
10. Carry handle
11. Loudspeakers
12. 3.5 mm jack audio input
13. RCA audio output
14. Power connector

Getting started:

1. Connect the small end of the power plug to your turntable.
2. Connect the large end of the power plug to the wall outlet.
3. Place the vinyl record on your turntable.
4. Set the correct speed (rpm) of your vinyl record (33/45 / rpm).
For a 45 rpm vinyl record, use the supplied adapter.
5. Turn on the device.
6. Move the tone arm to the desired starting point on the record.
7. Adjust the speaker volume to the desired level.
8. Slide the auto shutdown control switch to choose output shutdown.
9. At the end of recording, the tone arm will stop automatically. You must return the tone arm to the arm rest manually.
Headphone socket
Plug the headphones into the headphone jack to listen to music. Headphones are not included with the device.
Note: When using headphones, the speaker sound will be muted
RCA audio output
Allows you to play music from your turntable through the external speakers. To make this connection you need an RCA cable.
Play a 45 rpm vinyl
Placez l'adaptateur 45 tr / min sur la broche. Placez doucement votre disque 45 tours sur la platine.
Replace the cartridge
The record player cartridge should be replaced every 3 to 4 months after continuous playback.
USB Module:
This panel allows user to play music from inserted USB stick or SD card and record music directly from vinyl.
USB/SD ENCODING FUNCTION:
then there is notice sound "Bi". It will start
Insert USB/SD When playing old vinyl, just long press (about 3 seconds)
encoding function with GREEN flash light till press the key to stop it.
play previous music
play next music
Short press to select among USB/SD, BT, and recording FILE stored in USB/SD after stopping the old vinyl or the tone
ram set to the rest position.
on play mode: short press to start or pause the playing.
Delete the recorded file on USB/SD:
Firstly, you should press to choose the recorded files successfully.
Then Long press to delete the current music recorded from outer sound source.
Please be noted that only recorded sound file could be deleted by this option.
8