Idiomas disponibles
Idiomas disponibles
Fix the appliance to the pipe by means of its
specific fastener.
Disjoint the adjusting knob (when present)
and then release the relevant fixing screw.
Remove the front cover. Thread the power
supply wires in the provided fairlead and
connect them to the appliance terminals
according to the instructions of the following
paragraph "Wire connections". Snap the front
cover back, tighten it by means of the
provided screw and then fit the knob in its
proper seat (if applicable).
A = Spring-band
WIRING CONNECTIONS
Connections:
Terminal 1= Common contact
Terminal 2 = It opens the circuit when temperature raises
Terminal 3 = It closes the circuit when temperature raises
On heating systems the user have to connect the terminals 1
and 2 to the thermostat
TEMPERATURE SETTING
Adjusting the knob for setting the temperature of the thermostat according to the picture.
B= Temperature adjusting knob
GENERAL DIMENSIONS
R0
Pág.
4
