Protecting The Environment - Ego Power+ SSA1200 Manual Del Operador

TRANSMISSION GEARS LUBRICATION
EN
The transmission gears in the gear case need be lubricated
periodically with gear grease. Check the gear case grease level
about every 50 hours of operation by removing the sealing
screw on the side of the case.
If no grease can be seen on the sides of the gear, follow the
steps below to fill with gear grease up to 3/4 capacity.
Do not completely fill the transmission gear case.
1. Position the attachment upright so that the sealing
screw is facing upwards (Fig. G).
G-1 Gear Case
G-2 Sealing Screw
2. Use the multi-function wrench provided to loosen and
remove the sealing screw.
3. Use a grease syringe (not included) to inject some
grease into the screw hole; do not exceed 3/4
capacity.
4. Tighten the sealing screw after injection.
TRANSPORTING AND STORING
◾
Remove the battery pack from the tool.
◾
Clean the tool thoroughly before storing it.
Store the tool in a dry, well-ventilated area, locked-up or up
high, out of the reach of children. Do not store the tool on or
adjacent to fertilizers, gasoline, or other chemicals.

Protecting the environment

Do not dispose of electrical appliances as
unsorted municipal waste, use separate
collection facilities. Contact your local
government for information regarding the
collection systems available.
If electrical appliances are disposed of in
landfills or dumps, hazardous substances
can leak into the groundwater and get into
the food chain, damaging your health and
well-being.
10
SNOW SHOVEL ATTACHMENT — SSA1200