Assembling The Camera - Messoa NDF820 Guia De Inicio Rapido

tion Tip Note
When the tilt angle is less than 82 degrees, there is no distortion.

Assembling the Camera

Follow the steps below when all the camera adjustments and cabling
tasks are finished.
1. Assemble the inner liner.
2. Assemble the dome cover.
3. Secure the dome cover with the accompanying screw.
2.2. Initial Configuration via a PC
Before connecting the camera to your network infrastructure, it's
suggested that you connect the camera to a computer first to perform
initial configurations.
1. Configure the computer's IP address that must be on the
same network segment with the camera's default IP address
(192.168.1.30 by default), such as:
•
8 NDF820/NDF820E
All manuals and user guides at all-guides.com
V=49.9° (Field of View)
82° Tilt Angle
IP Address: 192.168.1.100
l Quick Start Guide
Distortion
Area