Canyon CND-SGCH3 Manual Del Usuario página 2

All manuals and user guides at all-guides.com
Attention:
Before you begin the assembling, make sure all parts are included and in good condition!
When chair will be delivered in the cold season, please start to assemble it in 2 hours after,
to provide a stable work of gas lift.
Follow the instruction gradually.
Plastic cup and gas lift must be separated before chair assembling.
To avoid misalignments, leave the screws loose and do not tighten them until all are in their
respective places.
Do not overtighten or force the screws as they could break, strip, or damage the threads of
the holes.
Using the wrong sizes of screws on a part could result in damage to the screw or the part.
Do not overload the chair. See max load information in technical specifications.
If there are stains on the surfaces of the chair, apply some polish on a soft towel and rub the
stains until they dissolves. Do not apply the polish directly on the chair.
Instruction
IMPORTANT!
If there is a
plastic cap on
the top of the
gaslift, you need
to remove it.
To prevent possible squeaking, we recommend that you
secure the plastic O-rings between seat B and mechanism
D, securing them with bolts
For a more convenient assembly of the seats, we
recommend that you use the additional screwdriver - P