Care And Maintenance - memorex MB2059D Guia Del Usuario

OPERATION
ERASING ALL MESSAGES
1
While in the Standby mode, press and hold the
DEL/REPEAT button for two seconds; ALL and
ERASE will appear in the display.
2
To erase all the messages, press the DEL/
REPEAT button again within five seconds. If the
DEL/REPEAT button is not pressed again within
the five seconds, the messages will not erase.
IMPORTANT NOTES:
• Once message(s) are deleted, they cannot be
recovered.
• If the memory is full, FULL will appear in the
display when you press the REC/STOP button to
start recording. The recording will be disabled.
All manuals and user guides at all-guides.com
1
25
1

CARE AND MAINTENANCE

RESETTING THE UNIT
If the unit is exposed to a strong static electrical
charge, the unit may lock up, or the display may
dim. This is very rare, but if it does happen,
remove the batteries and then reinstall. All settings
will return to their preset values, but the previous
messages are saved.
TRAFFIC SAFETY
• Do not use while operating a motorized vehicle.
It may create a traffic hazard and is illegal in
many areas.
• Even if your earphone is an open air type
designed to let you hear outside sounds, do not
turn the volume up so high that you cannot hear
what is around you.
• Use extreme caution or temporarily discontinue
use in potentially hazardous situations.
26