Metabo HPT UB 18DC Instrucciones De Seguridad Y Manual De Instrucciones página 12

Lámpara de trabajo inalámbrica
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

English
WARNING
Do not use the electrical
cord if damaged. Have it
repaired immediately.
2.
Insert the battery to the battery charger.
Firmly Insert the battery into the battery charger
as shown in Fig. 7.
Pilot lamp
Before
charging
While
charging
Charging
Pilot lamp
complete
(red)
Overheat
standby
Charging
impossible
12
Battery
Guide rail
Fig. 7
Indications of the pilot lamp
Lights for 0.5 seconds. Does not light
Blinks
for 0.5 seconds. (off for 0.5 seconds)
Lights continuously
Lights
Lights for 0.5 seconds. Does not light
Blinks
for 0.5 seconds. (off for 0.5 seconds)
Lights for 1 second. Does not light for
Blinks
0.5 seconds. (off for 0.5 seconds)
Lights for 0.1 seconds. Does not light
Flickers
for 0.1 seconds. (off for 0.1 seconds)
3.
Charging
When inserting a battery in the charger, the
pilot lamp will light up continuously in red.
When the battery becomes fully recharged,
the pilot lamp will blink in red. (At 1- second
intervals.) (See Table 2)
(1)
Lamp indication
The indications of the pilot lamp will be as
shown in Table 2, according to the condition of
the battery charger or the battery.
Table 2
Battery overheated.
Unable to charge.
(Charging will commence
when battery cools)
Malfunction in the battery
or the charger
Tabla de contenido
loading

Este manual también es adecuado para:

Ub 18dcq4

Tabla de contenido