Product Usage - Kunft KTCR3846 Manual De Instrucciones

NOTE:
Do not mix old batteries with new ones.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad,
ni-mh, etc.) batteries.
Replace the battery if the device is
not used for a long time (more than 1
month); Please remove the batteries to
avoid any leakage of battery acid.

2.2. Product usage

Clock and Sleep Timer
Setting the Clock
1. If in Radio mode, press and hold the
2. Press and hold the TIME/MEM button until the display begins to
blink, then release the button.
3. Press the HOUR button to adjust hours.
4. Press the MIN button to adjust minutes.
5. Press the TIME/MEM button to finish setting the time.
Radio
Playing the FM Radio
1. Press the button to turn the clock radio on.
2. Press the TUN+ and TUN- buttons to adjust the radio to the
desired frequency.
3. Press and hold the TUN+ and TUN- buttons to search for the next
available frequency.
4. Press the VOL+/- buttons to adjust the volume.
5. Press and hold the to turn the radio off.
Radio Reception
1. Adjust the position of the FM Antenna to improve FM radio
reception.
Saving a Station as a Preset
1. Follow the instructions for Tuning the FM Radio.
2. Tune to the desired station.
button to turn the unit off.
12
clock radio
3. Press and hold the TIME/MEM button and press TUNE+/- buttons
to choose your desired program location (between P01 and P10)
to save.
4. Press the TIME/MEM button again to confirm the current radio
station has been stored as a preset in the memory list (up to 10
stations can be stored).
Tuning to a Preset Radio Station
1. Follow the instructions for Tuning the Radio and Saving a Station
as a preset.
2. Press the TIME/MEM button to cycle through preset radio stations.
3. Press TIME/MEM buttons to choose a preset radio station.
Alarm
Setting the Alarm
1. If in radio mode, press and hold the
2. Press and hold the AL1 or AL2 button.
3. Press the HOUR button to adjust hours.
4. Press the MIN button to adjust minutes. The Alarm 1 or Alarm2
indicator will light up.
5. Press the AL1 or AL2 buttons repeatedly to switch between Radio,
Buzzer or off.
If the alarm is set to Radio, use the VOL+/-buttons to adjust the
alarm volume.
6. Once the set alarm time is reached, the alarm will beep.
To set another alarm, follow the above steps and choose other
alarm than the currently set.
Cancelling the Alarm
1. Follow the instructions for Setting the Alarm.
2. Press the AL1 or AL2 buttons repeatedly until the indicator is no
longer lit.
Snooze and Alarm Reset
After the alarm beeps:
Press SNOOZE button to delay the alarm for an additional 9 minutes.
Or press the button to turn the alarm off until the set alarm time
is reached again.
SLEEP
1. If in radio mode, press the SLEEP button repeatedly to set the
sleep timer (90, 80, 70, ...... 30, 20, 10 min. or OFF).
2. Once the set sleep time has expired the clock radio will
automatically power off.
EN
KTCR3846
button to turn the unit off.
13