Santerno SUNWAY SI Serie Manual Del Usuario página 100

SUNWAY SI
TM
Fault Information
DCI Device Error
Current Sensor
Error
AC Voltage Error
Frequency Error
Grid Lost Error
GFCI Error
DCI Error
If this error occurs frequently, please contact your
distributor or call
technical support.
If this error occurs frequently, please contact your
distributor or call
technical support.
·Check the volt of the grid.
·Check the connection between the inverter and the
grid.
·Check the settings of the on-grid standards of the
inverter.
·If the volt. of the grid is higher than the volt. regulated
by local grid, please inquire the local grid workers
whether they can adjust the volt. at the feed point or
change the value of the regulated volt.
If the volt. of the grid is in regulated range as allowed
and monitoring portal still shows this error, please
contact your distributor
SANTERNO technical support.
Check the setting of country and frequency of the local
grid, if the above mentioned are in normal, please
contact your distributor
SANTERNO technical support.
Check the connection status between the AC side of
the inverter and the grid, if the above mentioned are in
normal, please
ENERTRONICA SANTERNO technical support.
Check the insulation resistance of the positive side and
cathode side of the solar panel; check whether the
inverter is in wet environment; check the grounding of
the inverter. If the above mentioned are in normal,
please contact your distributor or call ENERTRONICA
SANTERNO technical support.
If this error always exists, please contact your
distributor or call
technical support.
Check the insulation resistance of the positive side and
100/156
Troubleshooting
ENERTRONICA
ENERTRONICA
or call
or call
contact your distributor
ENERTRONICA
MANUALE
D'USO
SANTERNO
SANTERNO
ENERTRONICA
ENERTRONICA
or call
SANTERNO