United Pacific 31239 Guia De Inicio Rapido

Connect Plug to Original OE Wire Harness
  
 Turn signal
 Low beam / High beam
 LED light bar
Beam Adjuster:
Clockwise = Beam UP
Counterclockwise = Beam DOWN

Connect to Original OE Plugs
DUAL FUNCTION
PROJECTOR HEADLIGHT
Item Numbers: 31239, 31240, 31252, 31253


Normal Fogging / Condensation
This bulletin provides information regarding headlights
that may experience fogging or condensation inside of the
headlamp assembly. A drop in air temperature may cause
condensation to form on the inside of a cool headlamp
lens. Generally, fogging is considered normal and can be
eliminated by turning on the headlamp with the engine
running for several minutes. In most cases, operating the
vehicle in normal driving condition will clear the headlamp
fogging. Headlamp assembly replacement WILL NOT be
necessary in most cases.
Note
� If any of the following conditions occur, please consult
with a professional mechanic to determine the
water source:
1. If condensation/fogging fails to dissipate a er operating
the headlight with the engine running for 30 minutes
2. If water pooled inside the headlamp
� A high pressure washer may also cause water to be forced
into the headlamp assembly.
021919 V3