General Maintenance - Easy Washer EX-1036 PLUS Manual De Usuario

GENERAL MAINTENANCE

WARNING: ALWAYS DISCONNECT THE PLUG FROM THE POWER SUPPLY BE-
FORE ANY MAINTENANCE IS STARTED.
1. INLET WATER FILTER Check the inlet water filter inside
the water tank before filling with water. Clean water filter
screen if it is clogged or replace it if the screen is damaged.
2. NOZZLE CLOGGED: A clogged nozzle will cause the
operating pressure to be too high causing the portable washer to surge.
If this happens turn unit off and unplug pressure washer:
Unplug power supply, pull trigger on spray nozzle handle to relieve pressure,

remove nozzle from hose.
Clean the spray nozzle with the nozzle cleaning tool. (See Diagrams 1&2 below).

Flush wand assembly backwards with water or compressed air.

If pressure is still too high, repeat steps 1-2.

3. LUBRICATION: No lubrication is required for this pump. Silicone grease may be
added to hose connector O-rings if connecting becomes difficult.
4. Add some silicone grease to the metal part of the spray nozzle if it has not been
used for a long time.
TO CLEAN SPRAY NOZZLE
STEP 1:
Pull back quick
coupling and detach
the nozzle from the
hose.
English
All manuals and user guides at all-guides.com
STEP 2:
Clean the nozzle with the
tool. Remove any dirt
from the nozzle and rinse
REPLACE FUSE
Unscrew end of power
cord adaptor to remove
old fuse. Discard and
replace with new fuse.
Easy Washer
®
33