Package Contents; Start-Up Procedure - Fontastic Xora20Q Manual Del Usuario

GB
Thank you for choosing Fontastic
Please read the manual carefully and note the safety advice.

Package contents

• Fontastic power bank Xora20Q
®
• Micro-USB cable
• User manual
Overview:
10
9
8
7
6
5
4
3
2
1
1. Power button
2. USB-A output
3. USB Type-C™ input/output
4. Micro USB input/output
5. USB-A output
6. Cover
7. Power LED
8. Wireless charging/fast charging LED
9. Battery level indicator
10. Wireless charging area
11. Solar module
12. Function LED solar module
13. LED light

Start-up procedure

Charge power bank
Fontastic power bank Xora20Q is equipped with an internal rechargeable lithium polymer
®
battery. Connect a charger to the Micro USB input (4) or the USB Type-C™ port (3) of the
power bank. The charging process begins. The LEDs of the battery status indicator (9)
flash during the charging process. Each of the four blue LEDs represents 25% capacity
(5000 mAh). When fully charged, all four blue LEDs light up continuously. The charging
process is finished. Now disconnect the power bank from the charger.
5
quality Products.
®
11
12
13
Note: Charge the power bank fully before initial use. With a fast charger, the powerbank
can be charged in a significantly shorter time. For maximum performance, we recommend
a power delivery adapter with at least 25W.
Solar panel:
The powerbank is equipped with a solar panel (11), which charges the powerbank as soon
as the light conditions are sufficient. When the powerbank is currently charging via the
panel, this is indicated by the green LED (12) lighting up.
Check battery level of the power bank
To check the battery status, press the power button (1). The LEDs (9) light up for a few
seconds and indicate the battery status of the power bank. Each of the four blue LEDs
represents 25% capacity (5000 mAh).
Charge devices using the power bank
Open the cover to access the ports of the powerbank. Connect the device to be charged
to a USB cable and connect it to one of the two USB-A or USB Type-C ports of the power
bank. The charging process will begin. Disconnect the cable from the power bank after
use.
NOTE: Devices can also be charged while the powerbank is charging!
Fast charge
For fast charging of compatible devices, use one of the USB-A outputs (2, 5) or the USB
Type-C™ (3) port. The intelligent IC detects the optimum charging voltage and adjusts it
accordingly. Devices to be charged must support appropriate fast charging technologies.
Note: It is possible to use all outputs to charge 3 devices simultaneously. If you use
several outlets at the same time, the available current is divided. The quick charge function
is deactivated. Please refer to the user manual of your device to find out how much power
is required.
Note: If there is short circuit while charging a device, the power bank will turn off. Plug an
appropriate cable into the Micro-USB input (4) or Type-C input (3) of the power bank, and
connect the USB plug of the cable to a USB charger or a computer. A short charge pulse is
sufficient to reactivate the power bank.
Charge devices wirelessly
:
Wireless charging capable devices can be charged via the inductive charging function.
Before wireless charging, make sure that the smartphone you are using supports wireless
charging.
Press the power button (1), the battery status indicator LEDs and the operation LED light
up. Place the device to be charged with the back (charging area) centered on the charging
area of the power bank (10). The function LED lights up and the charging process begins.
NOTE: Devices can also be charged wirelessly while the powerbank is charging!
GB
6