Next Level Racing Elite Serie Manual De Instrucciones página 9

[email protected]
HEIGHT ADJUSTMENT RANGE
22 Loosen the bolts securing the Main Cross Member to the Main Uprights. Adjust to your desired height
and tighten the bolts to lock in place.
A: Align end-cap to B: Depress the centre
extrusion
corner of of the end-cap and align
the tab to the first hole.
Then align second tab
with the second hole.
23
Install all End Caps.
16
PARTS:
• • NIL
PARTS:
• • 4 x END CAPS (40 x 40)
• • 2 x END CAPS (40 x 80)
• • 2 x END CAPS (40 x 80 ANGLED)
C: Finished end-cap
OVERHEAD DIRECT MONITOR
INSTALLATION
01
Install 2 x T-Nuts into inside channel of the Main Uprights. Repeat on the other side.
Repeat
on Other
Side
02
Install 2 x T-Nuts into the outer channel (side with alignment markings) of the Overhead Uprights.
Repeat on the other side.
Video Instruction: bit.ly/nlrbuild
PARTS:
Repeat • • 4 x T-NUTS
on Other
Side
PARTS:
OUTSIDE
• • 2 x OVERHEAD UPRIGHTS
• • 4 x T-NUTS
17