AKASO Brave 6 Plus Manual Del Usuario página 7

Ocultar thumbs Ver también para Brave 6 Plus:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Loop recording allows your camera to overwrite old files with new files. Once the
memory card becomes full, the camera will delete the first video file to make room
for the latest file. For example, if the setting for loop recording is "1 Minute", then the
camera will create video clips of 1 minute in length, and a 1-minute clip will be
deleted when the camera needs more memory.
2. Resolution: 4K30FPS/2.7K30FPS/1440P60FPS/1440P30FPS/1080P90FPS/
1080P60FPS/1080P30FPS/720P120FPS/720P60FPS
Default setting is 4K30FPS.
Note: When capturing video at high resolutions or high frame rates in warm
ambient temperatures, the camera may become warm and use more power.
3. Image Stabilization: On/Off
Default setting is Off.
This setting adjusts the footage to offset for motion during capturing. The result is
smoother footage, especially in activities with relatively small but fast motion like
cycling, motorcycling, and handheld uses.
4. Video Encode: H.264/H.265
Default setting is H.264.
Video encode is basically a process of converting a given video input into a digital
format that is compatible with most types of Web players and mobile devices.
5. Angle: Wide/Medium/Narrow
Default setting is Wide.
The angle refers to how much of the scene (measured in degrees) can be captured
through the camera lens. Wide angle captures the largest amount of the scene,
while Narrow angle captures the least.
6. Distortion Calibration: On/Off
Default setting is On.
09
7. Audio: On/Off
Default setting is On.
Turn off Audio, the camera does not record audio when you record video.
8. Exposure: +2/+1.5/+1/+0.5/0/-0.5/-1/-1.5/-2
Default setting is 0.
By default, your camera uses the entire image to determine the appropriate
exposure level. However, exposure lets you select an area that you want the camera
to prioritize when determining exposure. This setting is particularly useful in shots
where an important region might otherwise be over- or underexposed.
9. White Balance: Auto/Daylight/Cloudy/Tungsten/Fluorescent
Default setting is Auto.
White Balance lets you adjust the color temperature of videos and photos to
optimize for cool or warm lighting conditions.
10. Meter Mode: Center/Average
Default setting is Average.
The meter mode refers to the way in which a camera determines exposure.
PHOTO SETTINGS
1. Photo Mode: Normal Photo/Self Timer/Time Lapse Photo/Burst Photo
Default setting is Normal Photo.
Self Timer Mode
Self-Timer Mode gives a delay between pressing the shutter release and the
shutter's firing.
Self Timer Interval: 3 Sec/5 Sec/10 Sec/30 Sec
Default setting is 3 Sec.
10
Tabla de contenido
loading

Tabla de contenido