Idiomas disponibles
Idiomas disponibles
Please follow the below steps closely to set up the Evaro Teardrop Lightbulb Lamp.
Step 1: Place the magnetic suspension lamp stand on stable, flat and levelled table
surface.
Step 2: Connect the DC adapter to the magnetic suspension lamp stand and plug it into the wall
socket; switch on the power on the socket.
Step 3: Hold the lightblub with 2 hands and place one finger on top of the flat base of the lightbulb
and align the light bulb to the Magnetic Suspension bulb holder as per the below picture.
Step 4: Gently hover the lightbulb towards the Magnetic Suspension bulb holder till 15-18mm gap
apart, and you should feel an upward force from the magnetic suspension holder and a "click" to
suspend the lightbulb and the lightbulb should be turned on at the same time.
Step 5: When the lightbulb stays on and securely suspended you can slowly release your hand and
the lighbulb should be successfully levitated.
Step 6: When the lightbulb is successfully set up and levitating, the light should be on. If not, you
can turn on/off the light by tapping the
up again if tapping the touch button is not working.
NOTE:
1. In case the light bulb is not turned on but it's successfully suspended, please take the bulb down
and set it up again.
2. The bulb should be pulled back up straight to the magnetic suspension lightbulb holder if it's
been knocked over and won't drop down to the base.
Product Set Up/ Installation
on the base of the lamp base. Or you can try to set it
